We’re using Tibber as our electricity supplier — we have the Tibber Pulse reading our power usage and making it available in Home Assistant, through an integration.

But Tibber also controls our heat-pump, by interfacing a Sensibo Sky. Tibber’s smart heating control takes multiple factors into account; outside temperature, power price, thermal inertia. A clever algorithm, made by clever people — it works really well 🙂

I found an easy way to “hook into” this heat control, using a simple Home Assistant automation.

We recently got balanced ventilation installed, and I have interfaced it with Home Assistant. However — the ventilation unit have three “special modes” that can not be enabled through the Modbus interface; fireplace, kitchen, and override. These can only be set on the touch panel, mobile app, or through inputs terminals on the controller.

So I repurposed an old project and made a three-relay Wi-Fi controlled module, using MQTT to send commands and receive statuses.

Then used Home Assistant to automate it 🙂

Using a few cheap sensors, a wireless keypad, Zigbee2MQTT and Home Assistant; I was able to get a basic security alarm up and running during a free afternoon 🙂

We recently got balanced ventilation installed, and discovered that our ventilation unit has Modbus TCP/IP support. I even found a thread on the Home Assistant community talking about interfacing the C6 controller, which our unit has, into Home Assistant 😃

Here is my implementation 👇

Our house was first built as a log cabin in 1890, then extended in the 1950s, and again extended and completely renovated in 2000. It’s well insulated, and has no drafts — it seems to be relatively airtight.

Great for keeping the heat in, not so great for the air quality. Add the fact that we didn’t have a single fresh air vent, only those tiny trickle vents above the windows. What you are left with is a house with bad air quality.

So we installed a balanced ventilation system 🙂