This project is an improvement to my previous Lync status light, built back in May 2016. It worked fine, but it only had three 5 mm LEDs. People who knew about the module noticed, but many people didn’t, so it did not have the effect I was looking for. That’s why I decided to upgrade it, and this time use bigger and brighter lights!

When watching a few Linus Tech Tips videos on YouTube, I noted that he mostly used UniFi wireless access points. So I started reading about this series of products, and it didn’t take long fore I realized that I had to have it. I was already looking to replace my current router, as I wanted the WiFi access point to be placed more central in the house. And that didn’t work with a combined router and WiFi device. In the end, I replaced all my network infrastructure 😛

I mounted four Raspberry Pi 3’s in an acrylic stack frame, and used a 5V 20A DIN rail mounted power supply to drive them all.

A while back my kids got this SOS station toy, it came with a few emergency cars and the boys quite liked it. My girl friend and myself however; hated it, it had a speaker and made a high siren sound and an annoying voice would shout things like “all cars respond”. So I modified it; ripped out the speaker and mounted a few LEDs instead, so now it flashes but no sound.

I’ve gotten myself one of those ultrawide curved monitors. I’ve wanted one for a long time, and I finally bought one; a Samsung 34". Since my desk is pretty shallow, and not that big really, I also wanted to free up some work surface by getting things on shelves. So I’ve been doing a bit of work on my computer setup.